Unimet PG-M100i

WATER METERING

PN: PG100#M100i

UniMet PG-M100i is a high-precision pulse output developed for mechanical water meters with inductive indicators. It is designed to provide reliable flow reading via an open-collector output, enabling compatibility with almost all modern remote reading systems.

Thanks to the dual output – uncompensated and compensated – the device offers full flexibility from complete flow analysis including the direction of water movement, to simple consumption summation with automatic correction of the return flow.

UniMet PG-M100i is intended for installation and is fully compatible with the Honeywell-Elster-Ikom M100i water meter model.

Technical specifications for Unimet PG-M100i

See what our device offers

Compatibility

Sensor	Inductive (metal pointer or coil pointer)
Mechanical scales	Honeywell-Elster-Ikom M100i

General information

Impulse value	1 pulse = 1 liter¹
Maximum output load	30 VDC, 30 mA
Pulse width	60ms²
Cable	LiYY 5 x 0.25
Degree of protection	IP68
Operating temperature	-15°C to 65°C
Storage temperature	-20°C to 70°C
Housing material and color	Polycarbonate UV resistant, Grey
Housing dimensions (lxwxh) [mm]	99 x 68 x 42
Battery	3.6V Lithium, lifespan 15 years typically at an ambient temperature of 25°C

Wiring

White wire (White)	Uncompensated output [+] (FW and BW pulses)
Brown wire (Brown)	GND [-]
Green wire (Green)	Manipulation (TAMPER)
Yellow wire (Yellow)	Compensated output [+] (net consumption: FW-BW)
Gray wire (Grey)	Direction (High = forward flow; low = reverse flow)

Remark

For other manufacturers

All mentioned model and manufacturer names (Elster, Honeywell, Ikom, V200, C4000) are used solely for informational purposes to indicate compatibility.

UniMet PG-M100i is not a product of these manufacturers nor is it formally affiliated with them. Compatibility has been technically confirmed by testing in real-world conditions.